Enter a distance in kilometres and the time it took in minutes and seconds, and the tool shows your pace: the time per kilometre, and your speed in kilometres per hour. So 5 km in 25 minutes is a pace of 5:00 per km and a speed of 12 km/h. It assumes an even pace.
What the Pace Calculator does
This tool turns a distance and a time into the two numbers runners and walkers care about: pace, the minutes and seconds it takes to cover each kilometre, and speed, the kilometres covered each hour. They are two ways of expressing the same effort.
Use it to check how fast a run was, work out the pace you need to hit a goal time, or compare two runs on the same footing.
How it works
For pace, the tool converts your time to seconds and divides by the distance, giving the seconds per kilometre, then shows that as minutes and seconds. For speed, it divides the distance by the time in hours. The two are linked: a faster pace means a higher speed.
So a 5-kilometre run in 25 minutes is 1,500 seconds over 5 kilometres, which is 300 seconds (5 minutes) per kilometre, and 12 kilometres per hour. Both describe the same run, one as time-per-distance and the other as distance-per-time.
Methodology
Read distance and time. Take the distance in kilometres and the time in minutes and seconds.
Calculate pace. Convert the time to seconds, divide by the distance, and show it as minutes and seconds per kilometre.
Calculate speed. Divide the distance by the time in hours for kilometres per hour.
Show both. Display the pace and the speed together.
Pace and speed
pace = total time ÷ distance (shown as minutes:seconds per km)
speed = distance ÷ (time in hours) (kilometres per hour)
Worked example 5 km in 25:00 → pace 5:00 /km · speed 12.00 km/h
Pace and speed are two views of the same effort. The result assumes an even pace across the whole distance, so it is an average for the run.
Assumptions
The distance is in kilometres and the time is the total for that distance.
Pace and speed are averages over the whole distance, assuming an even effort; a run with surges and slow patches still gives a single average figure.
Pace is shown as minutes and seconds per kilometre, and speed as kilometres per hour.
Standards & references
Pace: The time taken to cover a unit of distance, usually minutes and seconds per kilometre. Runners use pace because it is easy to hold to during a run and to translate into a finish time.
Speed: The distance covered per unit of time, in kilometres per hour. It is the inverse view of pace and is common for cycling and on treadmills.
Average over the distance: Both figures are averages across the whole distance. They do not capture how the effort varied within the run, only the overall pace and speed.
Accuracy and limits
The pace and speed are exact for the distance and time you enter, since the sum is simple division, so they are precise for that run as a whole.
They are averages. A run with a fast start and a slow finish gives the same average pace as a perfectly even one, so the single figure does not show how the effort was distributed.
It uses kilometres. For miles, convert the distance first, or read the result knowing it is per kilometre, since the tool is set up in metric units.
It assumes the time is the moving time for the distance. Pauses or stops included in the time will slow the calculated pace, so use moving time for a true running pace.
Where people use it
Checking a run
See the pace and speed of a completed run.
Planning a goal pace
Work out the pace needed for a target time.
Comparing runs
Put two runs on the same footing.
Treadmill speed
Translate a pace into a treadmill speed setting.
When it fits, and when it doesn't
Good for
Finding pace and speed from a run
Planning a goal pace
Comparing runs on the same basis
Translating between pace and speed
Not the best choice for
Splits or pace within a run
Predicting a race time across distances
Miles without converting to kilometres
Adjusting for hills or stops
For per-kilometre splits, a watch or app that records them is needed. To predict a race time at another distance, a race-prediction calculator accounts for how pace changes with distance. This tool gives the average pace and speed.
Frequently asked questions
How is pace calculated?
The total time is converted to seconds and divided by the distance in kilometres, giving seconds per kilometre, which is shown as minutes and seconds. So 25 minutes over 5 km is 5:00 per km.
What is the difference between pace and speed?
Pace is time per distance (minutes and seconds per kilometre), while speed is distance per time (kilometres per hour). They describe the same effort; a faster pace is a higher speed.
Is the pace an average?
Yes. It is the average over the whole distance. A run with surges and slow sections still gives one average pace, so it does not show how the effort varied within the run.
How do I find the pace for a goal time?
Enter your target distance and the goal time, and the pace shown is what you need to hold. Aim to run close to that pace throughout to finish on target.
Can I use miles?
The tool uses kilometres. Convert a distance in miles to kilometres first (about 1.61 km per mile) so the pace and speed come out correctly.
Should I use total time or moving time?
Use moving time for a true running pace. If the time includes stops or pauses, the calculated pace will be slower than your actual running pace.
How do I convert pace to speed in my head?
Divide 60 by the pace in minutes per kilometre. A 5:00 pace is 60 divided by 5, which is 12 km/h. The tool does it for you, showing both.
What is a good running pace?
It varies hugely with fitness, distance and terrain, so there is no universal figure. Compare your pace against your own previous runs rather than a fixed standard.
Can it predict my marathon time from a 5K?
Not directly. Pace usually slows over longer distances, so a flat extrapolation overestimates. A race-prediction calculator that models that slowdown is more reliable for longer races.
Does it work for cycling or walking?
Yes. Any activity with a distance and a time gives a pace and speed. Speed in kilometres per hour is the more common measure for cycling.
Is my data uploaded?
No. Your browser does the sum and sends nothing to a server.
Why is my speed lower than I expected?
Usually because the time includes stops, or the distance is shorter than assumed. Check that the time is moving time and the distance is right, then the speed will match your effort.